The trap of buying a Stainless Steel Sink is as follows:
Trap 1: Fake 304 stainless steel Many people know that 304 stainless steel products are more suitable for home kitchen. The corresponding 201 or 202 materials are anti -corrosion, and the rust resistance is much worse. At present, 304,201, 202, and even stainless iron are mixed. It's a mixed scene of fish and dragons. Trap 2: Toxic Anti -Audio Small sound films, everyone knows. It is a kind of pads on the back of the sink, the bottom of the pot bile and the surroundings. Its role is to reduce the noise caused by the water sink due to the fall. Generally, after sticking the muffle, a layer of anti -condensation coating is sprayed on the back. Since it is said to toxic substances, the anti -coagulation dew coating also accounts for a little bit. Trap 3: Right -angle Sink vs rounded corner sink The stainless steel sinks of the kitchen are divided by structure, which can be divided into right -angle sinks and rounded corners sinks. Note that the right angles and rounded corners here refer to the welding area inside the biliary bile instead of the corners of the sink. The advantage of the right -angle sink is that the craftsmanship is relatively simple, and the finished product looks edges and corner, which makes people feel relatively high -end. However, the disadvantages of the right -angle sink are difficult to accept. Because the four -sided welding of the pot is 90 degrees of right angles, it is difficult to clean when it is cleaned. Therefore, it is easy to collect pollution for a long time, and it is very difficult to clean up.