As an important part of kitchen and bathroom decoration, sink shows high-level and high-quality consumer demand. Compared with the easy deformation, poor moisture resistance and rust characteristics of traditional sinks, more and more consumers prefer high-quality 304 stainless steel handmade sinks. In terms of material, workmanship and performance, handmade sinks "completely abuse" traditional stretch sinks. And take a closer look at the performance comparison data: The difference in the thickness of the sink Hand-made sinks, as the name suggests, are all hand-made, generally with a thickness of 1.2-1.5mm. The stainless steel plate of this thickness cannot be stretched on the abrasive tool, but only by hand, so the production speed is relatively slow, the quality is high, and the details The processing is more delicate; on the contrary, the thickness of the ordinary water tank is about 0.8mm, which is generally stretched by the machine in batch production, and the output is high, but it also has shortcomings such as easy deformation. The difference between sink materials The manual sink is made of laser welding process, which has high requirements on plates and equipment. Generally, stainless steel plates above 304 are used, which also increases the cost of the plate of the sink. The ordinary sink is made by stamping process, and 201 is commonly used. Made of low-grade stainless steel sheet, in order to make it easier to achieve stretching, the sheet tends to be thinner. The difference between Kitchen Sink surface treatment The surface of the Handmade Sink is mainly treated with fine wire drawing, and the texture of the sink can also be seen with the naked eye, which has a luxurious visual sense; the surface of the ordinary sink is treated with pickling of pearl sand, which is of low grade, low cost and simple process. Low, rust spots and other phenomena will appear after a period of use.
JIANGMEN MEIAO KITCHEN AND BATH CO.,LTD
